 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SKiiP 1803GB172-3DW I. Power section Absolute maximum ratings Symbol Conditions IGBT VCES VCC 1) Operating DC link voltage VGES IC Ts = 25 (70) C Inverse diode IF = -IC Ts = 25 (70) C IFSM Tj = 150 C, tp = 10ms; sin I2t (Diode) Diode, Tj = 150 C, 10ms Tj , (Tstg) Visol rms, AC, 1min per AC terminal, rms, Ts = IAC-terminal 70C, Tterminal <115C Ts = 25C unless otherwise specified Values 1700 1200 20 1800 (1350) 1800 (1350) 12960 840 -40...+150 (125) 4000 400 Units V V V A A A kA2s C V A SKiiP 3 SK integrated intelligent Power 2-pack SKiiP 1803GB172-3DW Preliminary data Case S33 Characteristics Symbol IGBT VCEsat Conditions Ts = 25C unless otherwise specified min. typ. max. Units IC = 900A, Tj = 25 (125)C; 1,9 (2,2) 2,4 V - measured at terminal VCEO Tj = 25 (125) C; at terminal 1,0 (0,9) 1,2 (1,1) V - rCE Tj = 25 (125) C; at terminal 1,0 (1,4) 1,3 (1,7) - m ICES VGE=0,VCE=VCES,Tj=25(125) C 3,6 (216) mA - - IC=900A, Vcc=900V 585 mJ - - Eon + Eoff Tj=125C Vcc=1200V 863 mJ - - LCE top, bottom 4 nH - - CCHC per phase , AC side 3,0 nF - - RCC-EE terminal-chip, Tj=25 C 0,17 - - m Inverse diode IF= 900A; Tj = 25(125) C VF = VEC 1,9 (1,7) V - 2,4 measured at terminal VTO Tj = 25 (125) C 1,1 (0,8) 1,4 (1,1) V - rT Tj = 25 (125) C 0,9 (1,0) 1,1 (1,2) - m IC=900A Vcc=900V 108 mJ - - ERR Tj=125C Vcc=1200V 128 mJ - - Mechanical data Mdc DC terminals, SI Units 6 8 Nm - Mac AC terminals, SI Units 13 15 Nm - 2,4 kg w - - SKiiP 3 System w/o heat sink w heat sink 5,2 kg - - Thermal characteristics (NWK 40; 8l/min; 50%glyc.); "s" reference to heat sink; "r" reference to built-in temperature sensor (acc. IEC 60747-15) RthjsIGBT per IGBT 0,017 C/W - - Rthjsdiode per diode 0,033 C/W - - Zth Ri (mK/W) (max. values) taui(s) 1 2 3 4 1 2 3 4 IGBTjr 1,4 6,8 7,8 0,0 69,0 0,35 0,02 1,0 diodejr 2,6 4,0 17,7 17,7 50,0 5,0 0,25 0,04 heatsinkra 4,6 4,7 1,1 0,6 48 15 2,8 0,4 Features * SKiiP technology inside * low loss IGBTs * CAL diode technology * integrated current sensor * integrated temperature sensor * integrated heat sink * IEC 60721-3-3 (humidity) class 3K3/IE32 (SKiiP 3 System) * IEC 68T.1 (climate) 40/125/56 (SKiiP 3 power section) * UL recognized File no. E63532 (SKiiP 3 power section) 1) with assembly of suitable MKP capacitor per terminal (SEMIKRON type is recommended) 8) AC connection busbars must be connected by the user; copper busbars available on request This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee, expressed or implied is made regarding delivery, performance or suitability. by SEMIKRON 030214 B 7 - 35 SKiiP 1803GB172-3DW SKiiP 3 SK integrated intelligent Power II. Integrated gate driver Absolute maximum ratings Symbol VS2 ViH dv/dt VisolIO VisolPD Visol12 f Top (Tstg) Gate driver features * CMOS compatible inputs * wide range power supply * integrated circuitry to sense phase current, heat sink temperature and DC-bus voltage (option) * short circuit protection * over current protection * over voltage protection (option) * power supply protected against under voltage * interlock of top/bottom switch * isolation by transformers * fibre optic interface (option for GB-types only) * IEC 68T.1 (climate) 40/85/56 (SKiiP 3 gate driver) Term unstabilized 24V power supply input signal voltage (high) secondary to primary side input / output (AC, rms, 2 s) partial discharge extinction voltage, rms, QPD 10 pC; output 1 / output 2 (AC, rms, 2s) switching frequency operating / storage temperature Value 35 15 + 0,3 75 4000 1500 1500 10 - 40 ... + 85 Unit V V kV/s V V V kHz C SKiiP 1803GB172-3DW Preliminary data Electrical characteristics (Ta = 25 C) Symbol VS2 IS2 ViT+ ViTRin Cin td(on)IO td(off)IO tpERRRESET tTD IanalogOUT IS1out ITRIPSC Ttp UDCTRIP Values Term min typ max. supply voltage non stabilized 13 24 30 VS2 = 24V 278 + 31*f / kHz + 0,00015 * (IAC/A)2 input threshold voltage (High) 11,2 - - input threshold voltage (Low) - - 5,4 input resistance - 10 - input capacitance - 1 - input-output turn-on propagation time - 1,1 - input-output turn-off propagation time - 1,6 - error memory reset time - 9 - top/bottom switch: interlock time - 3,3 - max. 5mA ; 8 V corresponds to - 1500 - 15 V supply voltage for external - - 50 components; max load current over current trip level ( Ianalog OUT = 10V) - 1875 - over temperature protection 110 - 120 not UDC-protection ( Uanalog OUT = 9V) imple - - (option for GB types) mente d Units V mA V V k nF s s s s A mA A C V For electrical and thermal design support please use SEMISEL. Access to SEMISEL is via SEMIKRON website http://www.semikron.com. This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee expressed or implied is made regarding delivery, performance or suitability. B 7 - 36 030214 by SEMIKRON |
Price & Availability of SKIIP1803GB172-3DW
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |